一 静态保养I. static maintenance
The static maintenance of carton printing machine refers to the maintenance of the machine when the machine is stationary.
1. Establish rules and regulations for machine maintenance.
The maintenance of offset press shall be subject to the instructions of the machine. Such as regular oil change, filter cleaning, regular detection of machine accuracy, etc.
2. Strengthen the maintenance of important parts.
Gears, cams, sprockets, rollers and bearings are important parts of the printing press. Their maintenance should be different from other parts because the change of their accuracy will affect the printing quality. Springs are used in many parts of the force balance mechanism on the machine. Their work directly determines the accuracy of the mutual cooperation of moving parts. Springs must have sensitive elasticity, and anelasticity and unrecoverable plastic deformation are unfavorable to the work of springs. If the above problems are found, replace the spring immediately.
3. Carry out technical reform and strengthen machine maintenance.
Machine maintenance requires that the convenience of machine maintenance should be fully considered in the design of the machine. However, due to the complexity of the printing press, it is obviously impossible to take every factor into account, and the content of machine maintenance will change with the change of environment. Therefore, those structures that are not conducive to machine maintenance should be improved without affecting normal operation.